Main Article Content
Abstract
Keywords
Article Details
Authors retain the copyright without restrictions for their published content in this journal. IJSRTM is a SHERPA ROMEO Journal.
Publishing License
This is an open-access article distributed under the terms of
References
- Mohandoss T, Madhusudhanan reddy G (1996) Effect of frequency of pulsing in gas tungsten arc welding on the microstructure and mechanical properties of titanium alloy welds. J Matar Sci Lett 15:626-628.
- Larson, H,. Karlsson L “ A Welding Reviewâ€, Vol 54 No2 ESAB AB, Sweden, PP 6-10,2000.
- H.J. Liu, H. Fuiji, M. Maeda, K, Nogi. 2003. Tensile properties and fracture locations of friction-stir welded joints of 6061-T6 aluminium Alloy. Mater. Sci. Lett. P.22.
- Muhsin J.J., Moneer.H, Tolephih and Muhammed.A.M., Effect of Friction Stir Welding parameters (Rotation and Transverse) speed on the transient temperature distribution in FSW of AA 7020-T53. ARPN Journal of Engineering and Applied science Vol7, 2012.
- Munoz C, Ruckert G (2004) comparision of TIG welded and Friction stir welded Al-4.5 Mg-0.26 Sc alloy. J.Matar process Technol 152:97-105.
- Peel M, Steuwer A, Preuss M, Withers PJ. Microstructure, mechanical properties and residual stresses as a function of welding speed in AA5083 friction stir welds. Acta Mater 2003;51:4791–801.
- Chen CM, Kovacevic R. Finite element modeling of friction stir welding– thermal and thermomechanical analysis. J Mach Tools Manuf 2003;43:1319–26.
- Schmidt H, Hattel J, Wert J. An analytical model for the heat generation in friction stir welding. Mater Sci Eng 2004;12:143–57.
- Elangovan K, Balasubramanian V (2008) influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminum alloy. Mater Des 29(2) :362- 373
- Elangovan K, Balasubramanian V, Valliappan M (2007) Influence of tool pin profile and axial force on the formation of friction stir processing zone in AA6061 aluminium alloy. Int J Adv Manuf Technol . DOI 10.1007/s00170-007-1100-2.
- Threadgill,P.L. Friction-Stir Welding-State of the Art, TWI, Report 678, England, 1999
- Lee, J.A. Carter, R.W., andDing, J.D.,â€Friction Stir Welding for Aluminum Metal MatrixComposites, NASA/TM-1999 Project No.98-09.
- Colligan, K. 1999. Material flow behavior during friction stir welding of aluminum. Welding Journal 78(7): 229-s to 237-s.
- G.Elatharasan, V.S.Senthil kumar, An Experimental Analysis and optimization of process parameters of Friction Stir Welding of AA 6061 – T6 Aluminium alloy using RSM. ICONDM 2013, Vol 64, 2013.
- A study of process parameters of Friction Stir Welded AA6061 Aluminium alloy. ARPN Journal of Engineering and Applied science Vol6, 2011.
- Threadgill,P.L. Friction-Stir Welding-State of the Art, TWI, Report 678, England, 1999.
- Liu, L.E. Murr, C.S Niou, J.C. McClure, and F.R. Vega, Micro structural aspects of thefriction-stir welding of 6061-T6 aluminum, Scripta Mat, 1997, vol 33-3, pp 355-36
- Rhodes, C. G., Mahoney, M. W., and Bingel, W. H. 1997. Effects of friction stir welding on microstructure of 7075 aluminum. Scripta Materialia 36(1): 69–75.
- Qasim M Doos, Bashar, Abdul wahab Experimental study of Friction Stir Welding of 6061-T6 Aluminium pipe. International Journal of Mechanical Engineering and Robatics. Vol 1. 2012.
References
Mohandoss T, Madhusudhanan reddy G (1996) Effect of frequency of pulsing in gas tungsten arc welding on the microstructure and mechanical properties of titanium alloy welds. J Matar Sci Lett 15:626-628.
Larson, H,. Karlsson L “ A Welding Reviewâ€, Vol 54 No2 ESAB AB, Sweden, PP 6-10,2000.
H.J. Liu, H. Fuiji, M. Maeda, K, Nogi. 2003. Tensile properties and fracture locations of friction-stir welded joints of 6061-T6 aluminium Alloy. Mater. Sci. Lett. P.22.
Muhsin J.J., Moneer.H, Tolephih and Muhammed.A.M., Effect of Friction Stir Welding parameters (Rotation and Transverse) speed on the transient temperature distribution in FSW of AA 7020-T53. ARPN Journal of Engineering and Applied science Vol7, 2012.
Munoz C, Ruckert G (2004) comparision of TIG welded and Friction stir welded Al-4.5 Mg-0.26 Sc alloy. J.Matar process Technol 152:97-105.
Peel M, Steuwer A, Preuss M, Withers PJ. Microstructure, mechanical properties and residual stresses as a function of welding speed in AA5083 friction stir welds. Acta Mater 2003;51:4791–801.
Chen CM, Kovacevic R. Finite element modeling of friction stir welding– thermal and thermomechanical analysis. J Mach Tools Manuf 2003;43:1319–26.
Schmidt H, Hattel J, Wert J. An analytical model for the heat generation in friction stir welding. Mater Sci Eng 2004;12:143–57.
Elangovan K, Balasubramanian V (2008) influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminum alloy. Mater Des 29(2) :362- 373
Elangovan K, Balasubramanian V, Valliappan M (2007) Influence of tool pin profile and axial force on the formation of friction stir processing zone in AA6061 aluminium alloy. Int J Adv Manuf Technol . DOI 10.1007/s00170-007-1100-2.
Threadgill,P.L. Friction-Stir Welding-State of the Art, TWI, Report 678, England, 1999
Lee, J.A. Carter, R.W., andDing, J.D.,â€Friction Stir Welding for Aluminum Metal MatrixComposites, NASA/TM-1999 Project No.98-09.
Colligan, K. 1999. Material flow behavior during friction stir welding of aluminum. Welding Journal 78(7): 229-s to 237-s.
G.Elatharasan, V.S.Senthil kumar, An Experimental Analysis and optimization of process parameters of Friction Stir Welding of AA 6061 – T6 Aluminium alloy using RSM. ICONDM 2013, Vol 64, 2013.
A study of process parameters of Friction Stir Welded AA6061 Aluminium alloy. ARPN Journal of Engineering and Applied science Vol6, 2011.
Threadgill,P.L. Friction-Stir Welding-State of the Art, TWI, Report 678, England, 1999.
Liu, L.E. Murr, C.S Niou, J.C. McClure, and F.R. Vega, Micro structural aspects of thefriction-stir welding of 6061-T6 aluminum, Scripta Mat, 1997, vol 33-3, pp 355-36
Rhodes, C. G., Mahoney, M. W., and Bingel, W. H. 1997. Effects of friction stir welding on microstructure of 7075 aluminum. Scripta Materialia 36(1): 69–75.
Qasim M Doos, Bashar, Abdul wahab Experimental study of Friction Stir Welding of 6061-T6 Aluminium pipe. International Journal of Mechanical Engineering and Robatics. Vol 1. 2012.