Main Article Content

Abstract

Abstract: Cement industry contributes to 5% of global CO2 emissions. To mitigate pollution, there is a need of CO2 sequestration into stable forms. Present research focusses on CO2 being channelized towards an important construction practice. This paper summarizes the potential of CO2 absorption in concrete. To verify CO2 absorption in concrete, an artificial CO2 environment for curing of concrete cubes using dry ice was created. Considering concrete of M20 grade, a comparative experimental study of water cured concrete cubes, CO2 cured concrete cubes, for penetration (using phenolphthalein indicator), and compressive strength was carried out. The result analysis of the tests indicated that CO2 cured concrete cubes showed 22.125% higher compressive strength than water cured concrete cubes and CO2 penetration of 13.5 mm after 2 hours. The rate of CO2 penetration and strength gain in concrete was found to be rapid in the early hours. It is shown that CO2 can prove to be a useful resource in the construction scenario, especially in the precast.

Keywords

Cement industry pollution CO2 sequestration carbonation CO2 curing dry ice penetration compressive strength precast industry.

Article Details

How to Cite
Tagwale, P., Bambroo, V., Bande, R., Rathod, P., & Mali, S. T. (2015). POTENTIAL OF CARBON DIOXIDE ABSORPTION IN CONCRETE. International Journal of Students’ Research in Technology & Management, 3(5), 369–372. https://doi.org/10.18510/ijsrtm.2015.357

References

  1. Concrete Experts International. 2004. Carbonation of concrete.<http://www.concreteexperts.com/pages/carb.htm> (August 2004).
  2. M. Chi, J.M., Huang, R., & Yang, C.C., Effect of carbonation on mechanical properties of concrete using accelerated testing method. Journal of Marine Science and Technology 10(1): 14-20, 2002 DOI: https://doi.org/10.51400/2709-6998.2296
  3. Montemor, M.F., Cunha, M.P., Ferreira, M.G., & Simoes, “Corrosion behaviour of rebars in fly ash mortar exposed to carbon dioxide and chlorides. Cement and concrete composites 24(1): 25-53, A.M. 2002 DOI: https://doi.org/10.1016/S0958-9465(01)00025-7
  4. Neville, A.M., “Properties of concreteâ€, 4th ed. Essex, England, UK: Longman Group Limited, 1995
  5. St. John, D.A., Poole, A.B., & Sims I., “The appearance and texture of concreteâ€, Chapter 5 of Concrete petrography – A handbook of investigative techniques: 205-214. London, UK: Arnold, 1998
  6. Liv Haselbach, “Potential for carbon dioxide absorption in concreteâ€, Journal of Environmental Engineering, ASCE, June 2009 7 “Concrete CO2 fact sheetâ€, NRMCA Publication Number 2PCO2, February 2012 8 Getachew Dagnew Gebreeyessus, Tassisa Kaba, Bhagwan Singh Chandravanshi, “Removing carbon dioxide from a stationary source through co-generation of carbonates/bicarbonates: The case of Mugher Cement Factoryâ€, African Journal of Environmental Science and Technology, Volume 8(1), January 2014
  7. S. Monkman, R. Niven, “Integration of carbon dioxide curing into precast concrete productionâ€, Carbon Sense Solutions, Canada
  8. Y. Shao, S. Monkman, A.J. Boyd, “Recycling carbon dioxide into concrete: A feasibility studyâ€, NRMCA, Concrete Sustainability Conference, 2010
  9. P.F. McGrath, “A simple chamber for accelerated carbonation testing of concreteâ€, McGath Engineering Ltd, Canada
  10. Yoon-moon Chun, Tarun R. Naik, Rudolph N. Kraus, “Carbon dioxide sequestration in concrete in different curing environmentsâ€, International Conference on Sustainable Construction Materials and Technologies, Coventry, U.K., June 2007
  11. Christian J. Engelsen, Jacob Mehus, Claus Pade & Dag Henning Sather, “Carbon dioxide uptake in demolished and crushed concreteâ€, Project Report 395-2005
  12. NSF Carbon Sequestration of Concrete Masonry Block: First Trial
  13. Saija Varjonen, “Accelerated carbonated concrete as corrosion environmentâ€
  14. Andrew J. Salber, Christopher W. Swan, “Design of fly ash concrete masonry for optimal carbon sequestrationâ€, World of Coal Ash (WOCA) Conference, Lexington, 22-25 April 2013